Duct Dawg X

KEY FEATURES

  • Self-supporting articulated boom
  • Remote controlled
  • 3-speed, 0 to 285 fpm
  • Short footprint, less than 16 ft.
  • CANbus technology
  • Hydraulic direct drive system

DOWNLOADS

There are no publications for this product.

OVERVIEW
SPECS

The Sherman + Reilly™ Duct Dawg™ X DDHX 75/100 is an underground puller capable pulling 7,500 lb or 10,000 lb respectively.  This underground unit simplifies jobsite setup with a fully articulated, self-supported 3-axis boom capable of performing a wide horizontal swing arc (greater than 50 degrees left/right), 90 degree vertical arc (up/down), 24-inch telescoping (in/out) with a sheave head that swivels approximately 60 degrees as well, allowing for approximately 10 degree adjustments within this range. The short length also makes setup easy.

Primary operational control is provided via a remote control which allows the operator complete locational flexibility.  This also lowers the risk of “touch potential” when pulling in proximity to energized environments.   The remote controller’s graphic system displays relevant pull information, including direction, line tension, line footage, and speed, as well as battery and connectivity strength.  CANbus technology provides for accurate real time display readouts of the machine system status.

The 3-speed gearbox allows for smooth operation with potential pulling and payout speeds between 0 to 120 feet per minute and an on demand payout of up to 285 feet per minute.  All on the continuous welded, heavy-duty frame, the pulling backbone is provided by hydraulically driven twin capstan 6-inch bullwheels (5 and 6 groove) with forward, reverse, and demand payout capabilities in each gear.

The control system and remote control are located in a lockable control box to prohibit unauthorized use. A custom toolbox insert organizes, secures, and protects air adapters and dies, while still providing room for sheaves and other tools.

DDHX-75 DDHX-100
Pulling Capacity Max 7,500 lb 10,000 lb
Bullwheels Twin capstan, 6 in. dia., 5-groove followed by 6-groove Twin capstan, 7 in. dia., 5-groove followed by 6-groove
Gearbox & Line Speed 1st gear 0-60 fpm @ 7,500 lb with demand payout 1st gear 0-60 fpm @ 10,000 lb with demand payout
2nd gear 0-120 fpm @ 3,500 lb with demand payout 2nd gear 0-120 fpm @ 5,000 lb with demand payout
3rd: 0-285 fpm @ 1,500 lb with demand payout
Drive System Hydraulic Hydraulic
Hydraulic Fluid ISO grade 32 ISO grade 32
Hydraulic Reservoir 25 gallons with cold weather package optional 25 gallons with cold weather package optional
Engine 42 hp, Diesel, water-cooled, electric start 42 hp, Diesel, water-cooled, electric start
Fuel Capacity 13 gallons 13 gallons
Pulling Rope       3/8 in., 6 x 25 XIP IWRC steel wire rope, 2,000 ft. 7/16 in., 6 x 25 XIP IWRC steel wire rope, 2,000 ft.
Boom Hydraulic, joystick controlled, 3-axis, >50 degree swing arc – 17 in. sheave w/ 60 degree swivel head Hydraulic, joystick controlled, 3-axis, >50 degree swing arc – 17 in. sheave w/ 60 degree swivel head
Levelwind Dual automatic fairlead sheaves Dual automatic fairlead sheaves
Puller Mounted Controls Hydraulic overrides; jacks, boom Hydraulic overrides; jacks, boom
Puller Wireless Controls CANbus controller communicating w/ radio controlled remote, 300 ft. max CANbus controller communicating w/ radio controlled remote, 300 ft. max
Footage Counter Electronic, actual footage, pay-in and pay-out with memory Electronic, actual footage, pay-in and pay-out with memory
Hydraulic Tool Circuit Optional – 7 gpm @ 2,500 psi auxiliary Optional – 7 gpm @ 2,500 psi auxiliary
Pulling Connectors Rotation-resistant: (1) rated at 3,000 lb & (1) rated at 8,800 lb Rotation-resistant: (1) rated at 3,000 lb & (1) rated at 8,800 lb
Frame Construction Steel tubing, continuous-weld Steel tubing, continuous-weld
Length, overall, nominal 186 in. 186 in.
Width, overall, nominal 95 in. 95 in.
Height, overall, nominal 114 in. 114 in.
Weight, nominal 5,000 lb w/out rope 5,200 lb w/out rope
7,200 lb with rope 7,400 lb with rope
GVWR 8,800 lb 8,800 lb
Suspension Leaf spring Leaf spring
Axle Configuration Single Single
Wheel Configuration & Tires Single, LT235/75R17.5 Single, LT235/75R17.5
Brakes, trailer Electric, with safety break-away switch Electric, with safety break-away switch
Towing Attachment 3 in. adjustable pintle eye 3 in. adjustable pintle eye
Safety Chains 2 ea., with hooks 2 ea., with hooks
Tie-Downs 5/8 in. diameter steel D-Rings 5/8 in. diameter steel D-Rings
Front / Nose Jack Hydraulic, with shoe – 144 in. square of surface area Hydraulic, with shoe – 144 in. square of surface area
Stabilizing Jacks Hydraulic, with shoe at rear comers – 144 in. square of surface area Hydraulic, with shoe at rear comers – 144 in. square of surface area
Electrical System 12 VDC, 60 amp alternator 12 VDC, 60 amp alternator
Lights, navigation US DOT LED, 12 VDC US DOT LED, 12 VDC
Battery 12 V 12 V
Grounding 3/4 in. dia. copper-clad steel ground loops (4) 3/4 in. dia. copper-clad steel ground loops (4)
Fire Extinguisher ABC ABC
Color White White


FEATURED PRODUCTS: