About the Hydraulic Superjet®
The Sherman + Reilly Hydraulic Superjet® is an internationally patented method for installing fiber optic cables in ducts. The system is lightweight and its carrying case can be used as a stand. The unit will fit into manholes when necessary, operate at odd angles, and can be cascaded in series.
Hydraulic Superjet® features twin opposing caterpillar pushers and hydraulic motors, powered by either a hydraulic power pack or hydraulic remote control (HRC-10). Recommended for use with cables .60 in. to 1.25 in. in diameter, the Hydraulic Superjet is especially useful with heavier armored cables.
Superjet features a self-adjusting cylinder for placing the proper amount of gripping pressure on the cable. Superjet also features the new quick track change feature and accepts bundle jetting kits for microduct installations.
For More Information about the Hydraulic Superjet® contact your local Sherman + Reilly Representative or call Sherman + Reilly directly at 1-800-251-7780.
|Cable Speed:||0-250 ft. per minute|
|Maximum Cable Diameter:||.39 in. – .125 in.|
|Maximum Outer Duct Diameter:||1 in.- 2.48 in.|
|Compressor CFM:||200 CFM – 750 CFM per duct dimension|
|Compressor PSI:||100 psi – 175 psi / 7-12 bar|
|Shipping Weight:||144 lbs.|
|Bare Unit Weight:||72 lbs.|
|Dimensions of Unit:||36 in. x 16 in. x 17 in.|
|Dimensions of Case:||36-1/2 in. x 17-1/2 in. x 18 in.|
Please refer to the Product Sheet found on this page under Downloads.