Used for Reconductoring on Vertical
Tie-Top Post Insualtors


  • 2 models available; AIA-CF & AIA-J
  • AIA-CF adjusts to fit most insulators with neck dia. for 2 1/8″ through 3 1/2″
  • AIA-J adjusts to fit most insulators with neck dia. for 3 1/4″ through 4 7/8″
  • Fits all S&R XS-100-B blocks
  • Forever Warranty™



About the Adjustable Insulator Adapters
The AIA-CF and AIA-J adapters clamp securely to a tie-top insulator by tightening the take-up handles. Natural rubber cushions permanently molded to the adapter protect the porcelain and restrict the adapter from rotation. The XS-100-B block can be mounted in the adapter vertically and at various angles to facilitate stringing tangents and angles.

Using the AIA adapters and XS-100-B, reconductoring is possible using the “Never-An-Outage-System,” as the conductor can be energized while in the block. These AIA adapters and XS-100-B block combination can also be used for conventional stringing on crossarms, on new construction, and on vertical or horizontal post insulators.

For larger than 4 7/8″ or smaller than 2 1/8″ neck diameter insulators, other adapters are available on request. Also available is Model No. AIA-4 Special with 3/4″ hex head (instead of standard hand knob) ideal for use with hydraulic tools.

For More Information about the Adjustable Insulator Adapters contact your local Sherman + Reilly Representative or call Sherman + Reilly directly at 1-800-251-7780.

There are no specifications available for this product.

Please refer to the Product Sheet found on this page under Downloads.