About the ATC Air Adapter Kit
The Sherman & Reilly Model ATC-111 Air Adapter makes it possible to easily convert existing pullers without any additional parts. Once the panel has been mounted on the puller, one line is connected to a 125-225 CFM air compressor and the other is connected to the remote head, which is secured in the duct with the pulling cable installed.
The proper size birdie has already been attached to the end of the pulling cable. Blowing of the cable is then controlled from the panel by the operator who is in a position to monitor the cable as it feeds off of the puller.
Remote head with dies for 4″, 5″, and 6″ duct are furnished with complete set of hoses. Control panel and fittings are standard.
For More Information about the ATC Air Adapter Kit contact your local Sherman & Reilly Representative or call Sherman & Reilly directly at 1-800-251-7780.
|Carrying Case Dimensions:||15″h x 17″w x 38″l; aluminum|
|Total Weight:||100 lbs.|
|Operating Air Pressure:||.10 to 25 lbs.|
|Air Relief Valve, safety:||25 PSI|
|Compressor CFM:||To be Powered by 125-225 CFM Air Compressor|
Please refer to the Product Sheet found on this page under Downloads.