Capstan Puller for Installation of Service Drops
500 lb. Pulling Capacity


  • Reduces risk of installer injury by eliminating hand pulling.
  • Light weight – less than 40 lb.
  • Portable & wheeled for easy remote site use.
  • On-board power from a gasoline-powered drill (sold separately).
  • Spuds for adapting to various conduit sizes included.
  • Forever Warranty™



About the CP-50 Puller

The CP-50 Compact Safety Puller is a powered puller designed specifically for installing secondary conductor or communications drop cable through underground conduit, from the street to the meter box or, in the case of communications cable, to the network interface box. Its light weight and wheeled carriage make it easy to handle and maneuver, including removing and storing it on a line truck, and mounting and dismounting it from a meter box. Its small size makes it easy and convenient to store. The CP-50 is powered by commonly available gasoline-powered drills (not included), and it includes spuds for adapting to common sizes of conduit.

CP-50 with PMTA (Pad Mount Transformer Attachment) converts the CP-50 from a meter base puller to a puller that is able to pull underground conductor through underground subsurface or above ground conduit or duct. Can be ordered as a combo with the CP-50, PMTA, 500 ft. rope, and reel stand.

For More Information about the CP-50 contact your local Sherman + Reilly Representative or call Sherman + Reilly directly at 1-800-251-7780.

Pulling Capacity, rated: 500 lb. @ 70 fpm
Height, overall, nom.: 39 1/2 in.
Width, overall, nom.: 17 1/2 in.
Depth, overall, nom.: 16 1/2 in.
Weight, nom.: 39 lb.
Frame Material: Aluminum
Tires: 4.10/3.50-4, pneumatic
Spud Adapter Sizes, ID: 2 in., 2.5 in., 3 in., and 4 in., conduit end
Drill Compatibility: Standard Battery Powered Drill Adaptor

Please refer to the Product Sheet found on this page under Downloads.