About the T-2608
The Sherman + Reilly Revolution Series T-2608 is a bullwheel tensioner built with two pairs of 60 in. 5-groove bullwheels (4 total) and a max tensioning capacity of 8,000 lbs. per sub-conductor or bullwheel. Each bullwheel has its own planetary gearbox and hydraulic motor with spring-applied hydraulic release brake. A precision, microprocessor-controlled motor drive enables inching, even under maximum load.
The T-2608 includes an Automatic Tensioning System which maintains an operator set tension. The automatic bullwheel synchronization system maintains equal sag of all conductors, while recording/displaying tension and distance, and permitting manual override. In addition to tensioning mode, the T-2608 can operate in a pull-drive mode for easy rewinding of unused conductor.
With state of the art design to ensure operator safety, the T-2608 features a Safe Zone Cab®. This enclosure is designed to keep an operator off the ground while the equipment is in use. Built with a fully adjustable, ergonomic seat and a full set of electronic controls and gauges. The Safe Zone® Cab is designed to reduce operator fatigue thereby reducing errors and injuries in the field. It also reduces the risk of “touch potential” in energized environments.
The T-2608 has PLC machine control with CAN-bus technology, uses a removable/replaceable memory card to store all relevant stringing data, self-diagnostic system for all hydraulic circuits, and a PTO for reel stand control. In addition to tensioning mode, the T-2608 can be operated in a pull-back mode for easy rewinding of unused conductor and in forward drive for ease of bullwheel reeving.
The T-2608 is also available in a 5th wheel configuration.
For More Information about the T-2608 contact your local Sherman + Reilly Representative or call Sherman + Reilly directly at 1-800-251-7780.
|Tensioning Capacity, max.:||8,000 lb. per bullwheel|
|Line Speed, max.:||4 mph|
|Bullwheel Size:||60 in. dia.|
|Bullwheel Count:||4 ea. (2 pair)|
|Bullwheel Groove Count:||5 per bullwheel|
|Groove Radius:||1 in.|
|Groove Lining Material:||Polyurethane, machined-groove|
|Tensioning Brake:||Hydraulic, motor-driven|
|Brake Control:||Automatic, per operator setting|
|Engine:||Diesel, 72 HP, water-cooled|
|Hydraulic Fluid:||ISO Grade 32|
|Hydraulic Reservoir:||20 gal.|
|Fuel Capacity:||12 gal.|
|Fairlead Rollers:||4 ea., 2 front, 2 rear, adjustable|
|Fail-Safe Brake:||Spring-applied, released by hydraulic pressure|
|Operator’s Safety Enclosure:||Safe-Zone® Cab, full enclosure with A/C and heat|
|Frame Construction:||Steel tubing, continuous-weld|
|Length, overall, nom.:||25 ft.|
|Width, overall, nom.:||8 ft., 6 in.|
|Height, overall, nom.:||10 ft., 4 in.|
|Weight, nom.:||18,500 lb.|
|Wheel Configuration & Tires:||Single, 245/70R17.5|
|Brakes, trailer:||Electric, with break-away safety switch|
|Towing Attachment:||3 in. adjustable pintle eye|
|Safety Chains:||2 ea., with hooks|
|Front/Nose Jack:||2 hydraulic, with shoe; anti-slide|
|Corner Stability Jacks:||2 hydraulic, with shoe; anti-slide|
|Electrical System:||12 VDC|
|Lights, navigation:||US DOT, LED, 12 VDC|
|Lights, illumination:||Cab-top floods|
|Battery:||Dual, 12 V|
|Grounding:||3/4 in. dia. copper-clad steel ground loops, (4)|
Please refer to the Product Sheet found on this page under Downloads.