Puller for Underground Installation
10,000 lb. Pulling Capacity

KEY FEATURES

  • Hydraulically-driven twin bullwheels.
  • Hydraulic extendable boom with 70º swing arc.
  • Joystick control, electronic/video display & boom camera.
  • Electronic footage counter, tensiometer, and data logging capabilities.
  • Optional on-board air compressor.
  • Full enclosure Safe-Zone Cab® with A/C and heat.
  • Revolution Series
  • Safe-Zone® Cab

DOWNLOADS

OVERVIEW
SPECS
OPTIONS

About the U1000X

The Sherman + Reilly Revolution Series U1000XA is a bullwheel puller for the installation of underground distribution conductor. The single platform, modular design provides 10,000 lbs. pulling capacity offering plenty of power to handle most installations. The hydraulically driven twin capstan bullwheels ensure smooth, well controlled pulls.

Powered by a 49 hp 3-cylinder Tier 4 diesel engine, the transmission has two forward speeds and a reverse demand payout. The U1000XA has plenty of power as well as flexibility to deal with varying needs during an underground pull. A joystick-controlled, hydraulically positioned extendable boom with 70°of swing arc is available for reaching into and pulling from pad-mounted transformers and other tight openings.

With state of the art design to ensure operator safety, the U1000XA features a Safe-Zone® Cab. This enclosure is designed to keep an operator off the ground while the equipment is in use. Built with a fully adjustable, ergonomic seat and a digital touch display for all machine operations, diagnostics, and pull status. The Safe-Zone® Cab is designed to reduce operator fatigue thereby reducing errors and injuries in the field.

Equipped with a digital electronic load recorder for documenting pulling tensions and an electronic footage counter providing accurate, and continuous measurement of conductor/cable deployed.

The U1000XA is also available with air.

For More Information about the U1000X contact your local Sherman + Reilly Representative or call Sherman + Reilly directly at 1-800-251-7780.

 

Pulling Capacity, max.: 10,000 lb.
Bullwheels: Twin capstan, 6 in. dia., 5-groove followed by 6-groove
Gearbox & Line Speed: 1st gear: 0-60 fpm @ 10,000 lb.; 2nd gear: 0-120 fpm @ 5,000 lb.; -0-300 fpm demand payout
Drive System: Hydraulic
Hydraulic Fluid: ISO Grade 32 transmission fluid
Hydraulic Reservoir: 22 gal.
Engine: 49 hp, Tier 4 Diesel, water-cooled
Fuel Capacity: 18 gal. (25 gal. w/ air compressor
Pulling Rope: 7/16 in., 6 x 26 XIP IWRC steel wire rope, 2,200 ft.
Boom: Hydraulic, joystick-controlled, 3-axis, 70º swing arc
Boom Camera: CCD, swivel-mounted at end of boom, cab display
Levelwind: Dual automatic fairlead sheaves
Operator’s Safety Enclosure: Safe-Zone® Cab, full enclosure with A/C and heat
Controls: All at control panel within cab: engine & pulling; digital instrumentation; emer. stop; tensiometer; video diplay
Wireless Controls: Winch speed & direction and emer. stop; 900 Mhz ISM band
Footage Counter: Electronic, actual footage, pay-in & pay-out
Hydraulic Tool Circuit: 7 gpm @ 2,000 psi, auxiliary for hand tools, pumps, etc.
Pulling Connectors: Rotation-resistant: 1 ea. rated 3,000 lb. & 1 ea. rated 8,000 lb.
Frame Construction: Steel tubing, continuous-weld
Length, overall, nom.: 20 ft.
Width, overall, nom.: 7 ft., 3 in.
Height, overall, nom.: 7 ft., boom stored
Weight, nom.: 6,500 lb., with rope
GVWR: 9,800 lb.
Suspension: Leaf spring
Axle Configuration: Single
Wheel Configuration & Tires: Single, LT235/75R17.5
Brakes, trailer: Electric, w/ break-away switch
Towing Attachment: 3 in. adjustable pintle eye
Safety Chains: 2 ea., with hooks
Tie Downs (4): 5/8 in. diameter steel D-Rings
Front/Nose Jack: Hydraulic, part of auto-leveling system, with shoe
Stabilizing Jacks: Hydraulic, part of auto-leveling system, with shoes
Electrical System: 12 VDC, 45 A alternator
Lights, navigation: US DOT, LED, 12 VDC
Lights, illumination: Cab-top floods (2 ea.), cab-interior dome
Battery: 12 V, 525 CCA
Grounding: 3/4 in. dia. copper-clad steel ground loops, (4)
Tool Box: Steel, lockable, complete set of tools, and E-35D & E-49D connectors

Strobe Light
Solar Battery Charger
Tensiometer