Places Multiple Microducts in a Duct that Already Contains One Existing Cable
For ordering or questions please contact Greenlee Communications at 1(800) 642-2155


  • Achievable distances are 1,500 ft. to 3,000 ft. on average.
  • One Y adapters is attached to the Superjet┬« and is used to place the additional microducts.
  • The other branch is used to seal off and hold the first cable.
  • The Y adapter will also simultaneously install two bundles of microducts utilizing two Superjets┬«.



About the Y-Adapter
The Sherman + Reilly “Y” adapter coupled to a Cablejet or Superjet is used for placing a second cable or microducts in a duct that already has one existing cable (subject to available space). Acheivable distances are 1500 to 3000 feet on average, depending on cable to duct ratios and other parameters. One branch of the “Y” adapter is attached to the Cablejet or Superjet and is used to place the additional cable. The other branch is used to seal off and hold the first cable. The adapter uses the same inserts that are used with the Cablejet or Superjet systems. The “Y” adapter has also been used to install two cables or multiple microducts simultaneously in one innerduct. This operation requires two Cablejets or two Superjets.

For More Information about the Y-Adapter contact your local Sherman + Reilly Representative or call Sherman + Reilly directly at 1-800-251-7780.

There are no specifications available for this product.

Please refer to the Product Sheet found on this page under Downloads.