GJCHK2
Since 1927 Dedicated to Getting Every Lineman Home, Every Night, No Exceptions FOR USE WITH A BLOCK IN AERIAL INSTALLATIONS. The Sherman+Reilly Single Multiversal Block is shown with the helicopter “outrigger arm” attachment. This block also features the double uplift rollers and hold down attachment that are available (not shown). This basic block is the […]
Since 1927 Dedicated to Getting Every Lineman Home, Every Night, No Exceptions CLAMPS SECURELY WHILE ALLOWING FOR VARIOUS MOUNTING OPTIONS The AIA-CF and AIA-J adjustable insulator adapters clamp securely to a tie-top insulator by tightening the take-up handles. Natural rubber cushions permanently molded to the adapter protect the porcelain and restrict the adapter from rotation. […]
Since 1927 Dedicated to Getting Every Lineman Home, Every Night, No Exceptions SNATCH BLOCKS DESIGNED FOR STRINGING OVERHEAD GROUND WIRES The 9511 block, or “big little block,” is little in overall length and weight but big in sheave and load capacity. Side opening for ease in placing in hoisting line. Safety locking pin permits easy […]
Since 1927 Dedicated to Getting Every Lineman Home, Every Night, No Exceptions LIGHT AND EASY TO HANDLE ROPE BUT TOUGH Unitrex XS Max Wear, Uniline’s high-tech cousin, is a parallel-core rope of Honeywell Spectra®, wrapped with a neoprene tape and over-braided with a tough jacket of high-tenacity polyester. The result is a synthetic cable, somewhat […]
Since 1927 Dedicated to Getting Every Lineman Home, Every Night, No Exceptions IMPROVED AIR ADAPTER & BIRDS FOR BETTER EFFICIENCIES & FASTER LINE OUT Bird & Air Adapter Winch Line Blower Kits feature performance improvements, with up to a 90% reduction in air loss and up to a 20% increase in tank PSI. Bird performance […]
Since 1927 Dedicated to Getting Every Lineman Home, Every Night, No Exceptions ADAPTER USED ON INSULATOR CAPS CAN HELP BLOCK NEGOTIATE ANGLES The LPA-17-A adapter is used with horizontal line posts. This adapter fits in the insulator cap and is held securely in place with the bolt, which is provided for securing the conductor clamp. […]
Since 1927 Dedicated to Getting Every Lineman Home, Every Night, No Exceptions DESIGNED TO GIVE POSITIVE CONTACT DURING THE STRINGING PROCESS A running ground is used when there is a potential exposure to electrical hazards. When such hazards exist, as a minimum, running grounds should be installed at the first and last tower between tensioner […]
Since 1927 Dedicated to Getting Every Lineman Home, Every Night, No Exceptions 7″ AND 14″ SIZES AVAILABLE The HD-72 and HD-142 Hold Down Blocks are unique designs for use in heavy hold-down situations, where keeping the pulling line or conductor clear of obstructions is important. A hold down line is connected to the shackle at […]
Since 1927 Dedicated to Getting Every Lineman Home, Every Night, No Exceptions ADDITIONAL XS-100-B BLOCK FITTINGS AVAILABLE These additional fittings and accessories work with the XS-100-B universal stringing block and with other products: Noose Ball Fitting (weight: 3/4 lbs., maximum working load 2,500 lbs.), #1 Hook, #1 Hook with Safety Latch, #6 Oval Eye, #8 […]
Since 1927 Dedicated to Getting Every Lineman Home, Every Night, No Exceptions OVERHEAD LINE STRINGING SWIVELS Swivels Specifically designed for overhead line stringing, these swivels are reliable, heavy duty products with adequate load rating for tension stringing, yet small enough in diameter to pass through conductor stringing blocks. Precision machined, alloy steel. Neoprene seals with […]